Quelltext der Seite Bestellung/en

English translation of the [[Bestellung|Bestellseite]]:
<br>


{| border=0
 |-
 |'''EPI-OSD Platine'''<br>
unpopulated EPI-OSD-Board, black stop-mask, yelow parts print, double-sided [[Epi-OSD/en]] '''12,90 EURO ''' <br>

 |-
 |'''EPI-OSD Platine vorbestückt und programmiert'''<br>
Preassembled and programmed EPI-OSD-Board [[Epi-OSD/en]] '''149,- EURO'''<br>

 |-
 |'''MAX7456'''<br>
OSD-Chip for the [[Epi-OSD/en]]-board '''19,50 EURO'''<br>

 |-
 |'''Recom R785.0-1.0'''<br>
5V Switching regulator to replace the 7805 - made by Recom '''9,95 Eur pro Stück'''<br>
input Voltage: 6,5 bis 18V, Output Voltage: 5V, Output Current: 1.0A, Efficency up to  94%<br>


 |-
 |'''EPIlepsy Board'''<br>
unpopulated, black stop mask, yellow parts print, double-sided [[Epilepsy]] '''34,00 Eur pro Stück'''


 |-
 |'''EPI-Strom-Platine'''<br>
EPI-STrom-Board - Current-Sensor-board for the EPI-OSD (without the sensor!), black stop-mask, yelow parts print, double-sided  [[EPI-Strom/en]] '''8,50, Eur pro Stück'''

 |-
 |'''EPI-Strom-Platine vorbestückt und programmiert'''<br>
Preassembled EPI-Strom-Board, The Current-Sensor have to be ordered seperately! [[EPI-Strom/en]] '''29,90 EURO'''

 |-
 |
'' ''' Notice - the 50A-sensors are back on stock! ''' '' <br>
 |-
 |'''EPI-Strom-Sensor 50A'''<br>
Allegro Current-Sensor for 50A for the use with [[EPI-Strom/en]] '''9,76, EURO'''

 |-
 |
'' ''' Notice - the 100A-Sensors are back on stock! ''' '' <br>
 |-
 |'''EPI-Strom-Sensor 100A'''<br>
Allegro Current-Sensor for 100A for the use with [[EPI-Strom/en]] '''9,76, EURO'''

The ACS754 is no longer in production, therefore we deliver teh ACS756 - it is compatible and more accurate.



 |-
 |'''EPI-USB-Prog-Adapter-Platine'''<br>
Helping board for the USB-Prog to provide the typical MK Programming connectors plus the 6-pin Atmel ISP connector [[EPI-USB-Prog]] '''9,00, EURO'''

 |-
 |'''USB-Prog von Embedded Systems'''<br>
The USB-Prog of embedded systems, preassembled. With this USB-stick one can flash the Atmel-Chips [[EPI-USB-Prog]] '''37,00, EURO'''

 |-
 |'''EPI-Tester Board'''<br>
The unpopulated Board for building the EPI-Tester - a device for testing I2C and PPM Motor-controllers, servos, showingthe PPM-signal, generating DMX-Signals (depending on the firmware) [[Epi-Test/en]] '''23,00, EURO'''

Just mention it in the "Bemerkung"


 |-
 |'''Package & Postage'''<br>
as a letter in bubble-envelope within germany: '''3,90 EURO'''<br>
"Nachnahme" within germany '''7,40 Eur''' (Write "Nachnahme" as a comment) 
The german Post additionally fetches 2 Euros! ...<br>
as a letter in bubble-envelope to teh other european countries '''5,50 Eur'''<br>
other countries pleas ask.<br>



'''PLEASE do not use e-Mail-Adresses which requires a "click here"-Action to proove to be no spam! We will not click any provided link!'''
<br /><br />
{{#widget:Bestellung
|url=http://wiki.mk-epi.de/bestellen_wm.php
|width=600
|height=800
|border=0
}}

All prices with the german VAT (actually 19%)<br>
After ordering (and doing some handwork here) you will be provided with a pro-forma-invoice.
In the letter with the goods you will find the original-invoice.

The items are sold by:<br><br>

'''Akku-seins'''<br>
Oberelsbacher Strasse 3<br>
97645 Oberwaldbehrungen<br>
germany<br>
Tel: +49-9774-9218<br>
e-Mail: akku (-at-) mk-epi.de<br>
VATID: DE 235094476<br>
<br><br>